Pre-blended, fast setting cementitious material.
Used for the erection of all types of fencing posts, gate posts, line posts, rotary lines etc.
Instructions for Use:
- Dig hole of suitable size and depth for post to be erected (depending on size the post should have between 25% and 33% in the ground).
- Place post in centre of hole.
- Half fill hole with clean water (2.5 litres).
- Pour the post mix evenly around the post.
- Add remaining water to dampen any dry post-mix (total water per bag 5 litres).
- Lightly compact to remove any trapped air.
- Plumb the post and prop for approx 15 minutes or until post is stable.
- Allow concrete to set prior to commencing any further work.
- Fill remainder of hole with soil, sod or pebble.
- Usage: One bag is sufficient to support a post in a hole measuring 250 x 250 x 350mm.
- Do not use in temperatures below 5 degrees Celsius or when ground is frozen.
- Protect from excessive drying.
- When mixed with clean water post mix will meet the requirements of I.S. EN 206-1: Concrete-Part 1: Specification performance, production and conformity.
Strength;
- after 1 Day 5N/mmsq
- after 28 Day 20N/mmsq.
- Quality product from Kilwaughter Minerals